58
List of shortcut keys
Shortcuts Explanation
Common
[MENU] + [1]–[4] knobs Shows the “KNOB” tab page on the MENU > SCENE EDIT or SYSTEM EDIT > COMMON screen.
[MENU] + BEND/MOD lever Shows the “BEND/MOD” tab page on the MENU > SCENE EDIT or SYSTEM EDIT > COMMON screen.
[MENU] + CTRL/HOLD pedal Shows the “PEDAL” tab page on the MENU > SCENE EDIT or SYSTEM EDIT > COMMON screen.
[MENU] + [ARPEGGIO] Shows the MENU > SCENE EDIT > ARPEGGIO screen.
[MENU] + [CHORD] Shows the MENU > SCENE EDIT > CHORD MEMORY screen.
[MENU] + [FAVORITE]/[BANK] Shows the MENU > SYSTEM EDIT > FAVORITE screen.
[MENU] + [DAW CTRL] Shows the MENU > SYSTEM EDIT > USER SCALE screen.
[SHIFT] + [ARPEGGIO] Turns the arpeggio’s Hold Switch on/o.
[SHIFT] + [MENU] Shows the KEY TOUCH screen.
[SHIFT] + [INC]/[DEC] , value dial Makes the value change in larger increments.
[SHIFT] + [Í]/[Ë]
Moves between tabs on the four-column settings screens, such as System and Edit.
[SHIFT] + [Á] (STEP)
Shows the STEP EDIT screen.
[SHIFT] + [KNOB ASSIGN]
Press the [KNOB ASSIGN] button while holding down the [SHIFT] button to assign the volume for parts 1–4 (the Part
1 Level–Part 4 Level parameters) to the [1]–[4] knobs. When you do this, the [KNOB ASSIGN] button blinks.
* When the current part is one of the parts 5–R, the volume of part 5–R (the Part 5 Level–Part R Level parameters)
is assigned.
[SHIFT] + [Ç]
on list screens for tones, etc.
Moves the cursor to the top of the list.
[SHIFT] + [É]
on list screens for tones, etc.
Moves the cursor to the bottom of the list.
Press [SHIFT] on the top screen The [2]–[6] buttons correspond to the EQ, MFX, IFX, CHO and REV switches.
[SPLIT] + key press when top
screen is shown
Sets the split point (when the split function is ON).
[SHIFT] + key press when on the
KEY RANGE tab page of the KEY
TOUCH screen
Species the key range on the keyboard.
PHRASE PAD (when [SEQUENCER], [RHYTHM], [AUDIO] and [MUTE] are all unlit)
[MENU] + pads [1]–[8] Shows the “PAD NOTE” tab page on the MENU > SYSTEM EDIT > COMMON screen.
[SHIFT] + pads [1]–[8] Holds the sound that’s triggered by the pad.
PHRASE PAD (sequencer)
[SHIFT] + [1]–[4] buttons
on the SEQUENCER screen
When the Step Length is 17 or greater, switches the current step position in 16-step increments.
[SHIFT] + pads [1]–[8]
on the SEQUENCER screen
Switches the Keyboard Switch on/o for parts 1–R.
[SHIFT] + [11]
on the STEP EDIT screen
Copies the current step data.
[SHIFT] + [12]
on the STEP EDIT screen
Pastes the data you’ve copied to the current step.
[SHIFT] + [13]
on the STEP EDIT screen
Erases the current note.
[SHIFT] + [14]
on the STEP EDIT screen
Erases the current CC message.
[SHIFT] + [15]
on the STEP EDIT screen
Erases all notes from the current step.
[SHIFT] + [16]
on the STEP EDIT screen
Erases all CC messages from the current step.
[SHIFT] + [Ë]
on the STEP EDIT screen
Moves to the next step.
[SHIFT] + [Í]
on the STEP EDIT screen
Moves to the previous step.
PHRASE PAD (audio player)
[SHIFT] + pads [1]–[8]
on the AUDIO PLAYER screen
Turns the loop on/o for the audio le that’s selected with the pads.
[SHIFT] + [ENTER] while audio is
playing on the AUDIO PLAYER
screen
When the cursor touches the Start Point: Sets the Start Point for the audio le being played.
When the cursor touches the End Point: Sets the End Point for the audio le being played.
PHRASE PAD (mute)
[SHIFT] + pads [1]–[8] Switches to the current part.
To Next Page
Loading...
