Roland JUNO-D6 - Erasing the Entire Step Sequencer Contents or Tracks at Once; (Erase); Sequencer Utilities; (Duplicate Steps)

38
Playing back/recording with the step sequencer
Operation Explanation
[SHIFT] + [11] Copies the current step data.
[SHIFT] + [12] Pastes the data you’ve copied to the current step.
[SHIFT] + [13] Erases the current note.
[SHIFT] + [14] Erases the current CC message.
[SHIFT] + [15] Erases all notes from the current step.
[SHIFT] + [16] Erases all CC messages from the current step.
3. When you are nished editing, press the [EXIT]
button.
Erasing the entire step sequencer contents or
tracks at once (ERASE)
1. While the SEQUENCER screen is shown, press the
[ERASE] button.
The ERASE menu screen appears.
2. Select the menu you want to erase, and press the
[ENTER] button.
Value Explanation
CURRENT NOTE
Only the note currently selected by the cursor is
erased.
CURRENT CC
Only the CC message currently selected by the
cursor is erased.
STEP NOTE All notes at the current step are erased.
STEP CC All CC messages at the current step are erased.
TRACK NOTE All notes in the current track are erased.
TRACK CC All CC messages in the current track are erased.
INITIALIZE Initializes all tracks.
The contents of the selected menu are erased.
Sequencer utilities
The screen contains a collection of the utility functions related to the
step sequencer. Here you can duplicate steps, copy tracks, initialize
data and so forth.
1. Press the [MENU] button.
The MENU screen appears.
2. Move the cursor to “SEQ UTILITY” and press the
[ENTER] button.
The SEQUENCER UTILITY screen appears.
3. Move the cursor to the function you want to
execute and press the [ENTER] button.
Duplicating the contents of all steps to the end
of a track (DUPLICATE STEPS)
Duplicates the content of the step sequencer for the specied track,
which doubles the number of steps.
* A part can contain up to 64 steps after its content is doubled.
1. On the SEQUENCER UTILITY screen, select
“DUPLICATE STEPS” and press the [ENTER] button.
Selects the tracks.
¹ ALL: Duplicates eight tracks at a time.
¹ TRACK 1-R: Duplicates only the selected track.
If you decide to cancel, press the [EXIT] button.
2. To execute, press the [ENTER] button.
The screen indicates “Completed” when the duplication is
completed.