Roland JUNO-D6 - Using a General-Purpose Controller

44
Using a general-purpose controller
You can use the pitch bend/modulation lever as well as pedal switches and expression pedals connected to the pedal jacks as general-purpose
controllers. You can also assign a variety of functions to these controllers.
1. Select the scene in question.
2. Select the current part (p. 17).
3. Operate the general-purpose controller.
The sound changes according to the function that’s assigned to
the controller.
Controllers Explanation
Pitch bend lever
Changes the pitch.
Some scenes have functions other than
pitch bend assigned to this controller.
Various functions can be assigned. Operate
the lever to use the assigned function.
Modulation lever
Generates control change message CC#1.
Other various functions can be assigned.
Operate the lever to use the assigned
function.
PEDAL CONTROL jack
Connect an expression pedal or pedal
switch (sold separately) here.
Various functions can be assigned to the
pedals. Use the pedal to turn the assigned
function on/o, adjust the volume and
so on.
PEDAL HOLD jack
Connect a pedal switch here (sold
separately) to use as a damper pedal.
Various other functions can be assigned
to this controller. Operate the pedal to use
the assigned function.
MEMO
¹ When you operate a general-purpose controller, the eect is
applied to the part that sounds when you press a key.
¹ If you press and hold the [MENU] button while using the pitch
bend/modulation lever or a pedal connected to the PEDAL
CONTROL or PEDAL HOLD jack, the settings screen for assigning
that function appears. For details, refer to “List of shortcut keys”
(p. 58).
¹ The functions assigned to the general-purpose controller can be
set globally on the system side or individually for each scene. In
SYSTEM EDIT > COMMON > PEDAL or BEND/MOD, you can choose
in advance whether you want to follow the system or scene
settings.
Parameter Value Explanation
Hold Pedal
Source
SYSTEM,
SCENE
Selects whether the function
controlled by the pedal connected
to the PEDAL HOLD jack follows
the system setting (SYSTEM) or the
currently selected scene (SCENE).
Control Pedal
Source
SYSTEM,
SCENE
Selects whether the function
controlled by the pedal connected
to the PEDAL CONTROL jack follows
the system setting (SYSTEM) or the
currently selected scene (SCENE).
Parameter Value Explanation
Pitch Bend
Source
SYSTEM,
SCENE
Selects whether the function
controlled by the pitch bend lever
follows the system setting (SYSTEM)
or the currently selected scene
(SCENE).
Modulation
Source
SYSTEM,
SCENE
Selects whether the function
controlled by the modulation lever
follows the system setting (SYSTEM)
or the currently selected scene
(SCENE).
* For details on the settings, refer to “Operating the menu (MENU)”
(p. 49).