Roland JUNO-D6 - Import;Export; Importing Tones; Importing Scenes

50
Operating the menu (MENU)
Importing tones
You can import tones that you’ve exported from another XPS-60 into
this instrument as additional tones.
Saving tones to a USB ash drive
* If this is the rst time you’re using the USB ash drive, format it on
the XPS-60 (p. 54).
1. Prepare a SVZ le with the tones you’ve exported
using the export function on another XPS-60, which
you’ll import into this instrument.
2. Connect a USB ash drive to your computer.
3. Save the SVZ le to the “ROLAND/SOUND” folder on
your USB ash drive.
4. Remove the USB ash drive from your computer
and connect it to this instrument.
Importing tones into the XPS-60
1. On the UTILITY screen, move the cursor to “IMPORT
TONE” and press the [ENTER] button.
2. Move the cursor to the SVZ le you want to import,
and press the [ENTER] button.
3. Make sure that the tone names you want to import
are selected with a check mark, and press the
[ENTER] button.
Button Explanation
[3] CHECK
or [INC] [DEC]
Selects or deselects the check marks for
individual tones.
[4] CHECK ALL
Selects or deselects the check marks for
all tones.
Button Explanation
[E5] with SAMPLE
For tones that contain user samples, this
imports, selects or deselects the check
marks, including the samples.
* Samples included in user tones are
stored in the user sample area. When
the user sample area is full, the message
“Import Error!” is shown, and the data
can’t be imported. In this case, delete
unnecessary user samples to free up
space so that the data can be imported.
4. Select the numbers of the tones you want to import
with a check mark, and press the [ENTER] button.
Button Explanation
[3] CHECK
or [INC] [DEC]
Selects or deselects the check marks
for individual user tones in the save
destination.
[4] CHECK ALL
Selects or deselects the check marks for all
save destinations.
A conrmation message appears.
If you decide to cancel, press the [EXIT] button.
NOTE
The selected user tones in the import destination are overwritten.
5. Move the cursor to “OK” and press the [ENTER]
button.
The display shows “Import Tone Completed!” when importing is
done.
Importing scenes
You can import scenes as additional scenes into this instrument that
were exported from another XPS-60.
* You can also import scenes from a backup le.
Saving scenes to a USB ash drive
* If this is the rst time you’re using the USB ash drive, format it on
the XPS-60 (p. 54).
1. Prepare a SVD le with the scenes you’ve exported
using the export function on another XPS-60, which
you’ll import into this instrument.
2. Connect a USB ash drive to your computer.
3. Save the SVD le to the “ROLAND/SOUND” folder
on your USB ash drive.
4. Remove the USB ash drive from your computer
and connect it to this instrument.
Import/export