Roland JUNO-D6 - Exporting Tones

51
Operating the menu (MENU)
Importing scenes into the XPS-60
1. On the UTILITY screen, move the cursor to “IMPORT
SCENE” and press the [ENTER] button.
2. Move the cursor to the SVD le you want to import,
and press the [ENTER] button.
3. Make sure that the scene names you want to import
are selected with a check mark, and press the
[ENTER] button.
MEMO
Button Explanation
[3] CHECK
or [INC] [DEC]
Selects or deselects the check marks for individual
scenes.
[4] CHECK ALL Selects or deselects the check marks for all scenes.
4. Select the numbers of the scenes you want to
import with a check mark, and press the [ENTER]
button.
Button Explanation
[3] CHECK
or [INC] [DEC]
Selects or deselects the check marks for individual
user scenes in the save destination.
[4] CHECK ALL
Selects or deselects the check marks for all save
destinations.
A conrmation message appears.
If you decide to cancel, press the [EXIT] button.
NOTE
The selected scenes in the import destination are overwritten.
5. Move the cursor to “OK” and press the [ENTER]
button.
The display shows “Import Scene Completed!” when importing is
done.
MEMO
If the following data is being used by the scene of the import
destination, you can select whether to import that data as well.
¹ User tone
¹ User drums
Exporting tones
You can export the user tone data to a SVZ le.
1. Connect a USB ash drive.
2. On the UTILITY screen, move the cursor to “EXPORT
TONE” and press the [ENTER] button.
3. Make sure that the tone names you want to export
are selected with a check mark, and press the
[ENTER] button.
MEMO
Button Explanation
[3] CHECK
or [INC] [DEC]
Selects or deselects the check marks for
individual tones.
[4] CHECK ALL
Selects or deselects the check marks for
all tones.
[5] with SAMPLE
For tones that contain user samples, this
exports, selects or deselects the check
marks, including the samples.
4. Input the name of the SVZ le to export, and press
the [ENTER] button.
A conrmation message appears.
If you decide to cancel, press the [EXIT] button.
5. Move the cursor to “OK” and press the [ENTER]
button.
The display shows “Export Tone Completed!” when exporting is
done.