Roland JUNO-D6 - Exporting Scenes

52
Operating the menu (MENU)
Exporting scenes
You can export the scene data to a SVD le.
1. Connect a USB ash drive to this instrument.
2. On the UTILITY screen, move the cursor to “EXPORT
SCENE” and press the [ENTER] button.
3. Make sure that the scene names you want to export
are selected with a check mark, and press the
[ENTER] button.
MEMO
Button Explanation
[3] CHECK
or [INC] [DEC]
Selects or deselects the check marks for
individual scenes.
[4] CHECK ALL
Selects or deselects the check marks for all
scenes.
[5] with SAMPLE
For scenes that contain user samples, this
exports, selects or deselects the check
marks, including the samples.
4. Input the name of the SVD le to export, and press
the [ENTER] button.
A conrmation message appears.
If you decide to cancel, press the [EXIT] button.
5. Move the cursor to “OK” and press the [ENTER]
button.
The display shows “Export Scene Completed!” when exporting is
done.