Roland LEC-330 - How to Load Sheet Media

5-3 Accommodating Various Kinds of Media
98
Chapter 5 Feature Reference Chapter 5 Feature Reference
Chapter 5 Feature Reference
How to Load Sheet Media
To load and use sheet media, follow the steps below.
1. Load the sheet media.

Measure the thickness of the sheet media.
If the measured value is 0.5 millimeters or more, increase the height of the print heads.
 P. 106, "Adjusting Head Height to Match Media Thickness"

Detach the rear cover.

If roll media is loaded, then remove it.

Remove both shafts.

Pass the sheet media through the machine.

Attach the rear cover.
Rear cover
Engage.
Rear cover
Engage.