84
Chapter 4 Maintenance and Adjustment Chapter 4 Maintenance and Adjustment
4-5 Adjustment of White Ink
When white ink is used, dot drop-out or other problems that impede normal ink discharge may occur
even when powerful cleaning or manual cleaning of the print heads has been performed. This can occur
because the ingredients in white ink tend to settle, and may harden if allowed to stand for a lengthy
time. If this happens, carry out the operations described below.
These operations require two SOL INK cleaning cartridges.
Procedure
Press .
Press
several times.
Press .
Discard the discharged uid and attach the emptied bottle.
Press .
Remove the ink cartridges from slots 5 and 6.
Insert SOL INK cleaning cartridges into slots 5
and 6.
Remove the SOL INK cleaning cartridges from slots
5 and 6.
Carry out steps
and
as many times as indicated by the
on-screen messages.
Insert the ink cartridges into slots 5 and 6.
To Next Page
Loading...
