Chapter 2 Basic Operation
2-4 Starting Printing
45
Chapter 2 Basic Operation
Printing Tests and Cleaning
We recommend performing a printing test to check for problems such as dot drop-out before you carry
out actual printing. If problems such as dot drop-out are found, clean the print heads.
How to Perform a Printing Test
Holding down for one second or longer prints a test pattern.
You can print the test pattern where you want by using
to move the cutting
carriage, then pressing
. The front cover may be left open during movement, but be sure to
close it before you press
.
To Next Page
Loading...
