Press .
Press
to go back to the original screen.
Description
The platen uses suction to grip the media and keep it stable. When media comes loose from the platen
because it is warped or wrinkled, increasing the suction force may help correct the problem. Conversely,
when the media is imsy and cannot move smoothly, reducing the suction force may help.
When set to "AUTO," the suction force is automatically adjusted to the optimal level for the media
width.
You can also make this setting on the computer. When you have made the setting on the computer,
the computer's setting is used and the printer's setting is ignored.
Default Setting
[VACUUM POWER]: AUTO
Speeding Up Printing for Narrow Media
Procedure
Press .
Press
several times.
Press .
Press
several times.
Press .
Use
to select "SHEET" or "OFF."
Press
to enable the setting.
Press .
Press
to go back to the original screen.
Description
This shortens printing time by reducing the width of the print-head movement range to the minimum
necessary. This is eective when the width of the media or the printing data is narrow.
"FULL" sets the movement range of the print heads to the maximum width of loadable media.
"SHEET" matches the range of print-head movement to the width of the media.
"OFF" matches the range of print-head movement to the printing data. Movement is limited to the
To Next Page
Loading...
