Roland LEC-330 - Setting the Print-Start Position

Chapter 5 Feature Reference
91
Chapter 5 Feature Reference
5-2 Setting the Print-start Position
Setting the Print-start Position
Procedure

Use to move the cutting carriage.
Align the center of the blade with the new print-start position.

Press .
Description
You can set the print-start position at any location you want. Note, however, that this setting returns
to its default value after printing, and so it needs to be set separately for each page. When the start
location has been set,
lights up and screen displays the character “B” together with the print-
W 600mm
B
Printing area
Feed-direction
start position
Scan-direction
start position
Print-start
position
Scan-direction
Feed-direction
This indicates that the printing-start position has been set.