Roland LEC-330 - Preventing Soiling of the Media and Dot Drop-Out During Printing

Chapter 5 Feature Reference Chapter 5 Feature Reference
5-3 Accommodating Various Kinds of Media
95
Chapter 5 Feature Reference
minimum amount necessary, and this can be expected to yield the fastest printing.
Note, however, that the range of print-head movement is limited to the maximum scanning width that
is printed. Also, the maximum scanning width printed is reset every time printing of a page nishes.
Default Setting
[FULL WIDTH S]: FULL
Preventing Soiling of the Media and Dot Drop-out During Printing
Procedure

Press .
Press
several times.

Press .
Press
several times.

Press .
Use
to select a value from "5 min" to
"990 min," or "PAGE."
Press
to enable the setting.
MENU
SUB MENU
SUB MENU
PERIODIC CL.
PERIODIC CL .
NONE 10 min
Print-end position
Feed direction
Scan direction
Next print-start position
Print-start position
Printing area
Print-head movement range
Range of print-head movement
when set to "OFF"