2.
Read the correction values from the test pattern.
If the Printing-test Results Are Difcult to Interpret
Examine the results from different angles in a well-lighted location. Take advantage of
reected light to enable visual checking. We recommend performing the printing test
on transparent or silver-colored media.
3.
Enter the correction values that you read.
Enter the corresponding correction values for H1 through H6 (H1 through H3 on LEC-300A).
Press .
Press .
Use
to select. Use to
set the correction value.
Press
to nish making the settings for
[SETTING NO.1].
To Next Page
Loading...
