Roland LEC-330 - Page 39

Chapter 2 Basic Operation
2-3 Loading and Cutting Off Media
37
Chapter 2 Basic Operation

Secure the stoppers in place in alignment with the width of the media.
Make sure the media anges are straight. Correct media feed is impossible if either of the media
anges is at an angle.

Attach the rear cover.

Pass the leading edge of the media between the grit rollers and the pinch roll-
ers, and feed it out as far as the platen.
OK Not OK
Pinch roller
Grit roller
Platen
Screws
Stoppers
Rear cover
Engage.
Engage.