4-2 When Head Cleaning Is Not Effective
68
Chapter 4 Maintenance and Adjustment Chapter 4 Maintenance and Adjustment
If the Printing-test Results Are Difcult to Interpret
Examine the results from different angles in a well-lighted location. Take advantage of
reected light to enable visual checking. We recommend performing the printing test
on transparent or silver-colored media.
3.
Start cleaning.
Press .
If You Chose "MEDIUM CL."
LEC-300A
The screen shown in the gure appears, then cleaning starts.
When it nishes, the screen shown in the gure appears. Go
on to Step
LEC-330
If You Chose "POWERFUL CL."
The screen shown in the gure appears. Go on to Step
.
Check the drain bottle.
If the amount of discharged uid is near the upper-limit line, then remove the
bottle, discard the collected uid, and reattach the bottle.
P. 64, "Disposing of Discharged Ink," step
2
LEC-300A
Press
.
The screen shown in the gure appears, then cleaning starts.
When it nishes, the screen shown in the gure appears again.
Go on to Step
.
LEC-330
To Next Page
Loading...
