Roland MV-8000 - Silencing a Specific Track During Playback (Mute); Playing Only a Specific Track (Solo)

114
Playing your songs
Silencing a specific track during playback (Mute)
If you want to silence the performance of a specific instrument while the song plays,
you can Mute the track that contains that performance.
1.
Press .
The SEQUENCE screen (p. 205) will appear.
2.
Use (up/down) to make the track you want to Mute the current track.
The current track is highlighted.
3.
Use (left/right) to move the cursor to the “M” column.
“M” is the Mute switch; it controls the Mute function of the track.
4. Turn the VALUE dial toward the right or press .
“M” will be displayed at the cursor location of the current track. Mute is
now on.
Playing only a specific track (Solo)
If you want to hear only the performance of a specific instrument while the song plays,
you can Solo the track that contains that performance.
1.
Press .
The SEQUENCE screen (p. 205) will appear.
2.
Use (up/down) to make the track you want to Solo the current track.
The current track is highlighted.
To cancel muting, turn the
VALUE dial toward the left or
press [DEC] to change the “M”
indication to “-”.
ECS05_manual_e.book 114 ページ ２００５年１１月３０日 水曜日 午前１１時１４分