Roland MV-8000 - Limit the Performance Data Received by a Part

50
Editing a sampled sound
Limit the performance data received by a part
➜ set the MIDI Filter.
Add a check mark ✔ to each type of MIDI
message that you want the part to receive.
The VelC (Velocity Curve) parameter lets you
specify how the velocity value that is actually
received will correspond to the actual loudness.
For details, refer to the MIDI FILTER screen (p.
267).
To access the MIDI FILTER
screen, access the
INSTRUMENT screen and
press [F2 (MIDI Filter)]. For
details, refer to MIDI FILTER
screen (p. 267).
ECS05_manual_e.book 50 ページ ２００５年１１月３０日 水曜日 午前１１時１４分