172
Using the MV8-OP1 (Audio I/O Expansion) to connect external devices
Inputting audio via a digital connection
(coaxial/optical)
The MV-8000 has both coaxial and optical type digital input connectors. You must
choose either one or the other type. You cannot use both simultaneously.
1.
Connect your digital audio device to the MV-8000 as described in Quick Start
“Preparing your equipment and making connections” (p. 4).
2.
Press .
The
SYSTEM MENU screen
(p. 319) will appear.
3.
With the cursor located in the upper row of
icons, press (Global). Alternatively, select
the GLOBAL icon and press .
The
GLOBAL screen
(p. 320) will appear.
4.
Set the Input Select parameter to either “Coaxial” or “Optical.”
Select “Coaxial” if you want to input from the coaxial connector, or select “Optical” if
you want to input from the optical connector. When you change the setting, the
illustration of the input connector in the GLOBAL screen will also change.
ECS05_manual_e.book 172 ページ ２００５年１１月３０日 水曜日 午前１１時１４分
To Next Page
Loading...
