Roland Octa-Capture

32
Auto Power O
The OCTA-CAPTURE is able to turn itself o automatically.
The power is turned o automatically after a predetermined amount of time has passed since you’ve
operated anything on the panel.
* Auto Power O will not function if the OCTA-CAPTURE is connected to your computer, or if a
microphone/instrument is connected.
The [POWER] switch will blink approximately 15 minutes before the power turns o.
When the OCTA-CAPTURE left the factory, all of this functions was set to “4HOURS.”
To set a function to “OFF,” follow the procedure below.
2 43 5
1 6
1. Press and hold the [DISPLAY] button for one second.
The System screen will appear.
2. Turn the [CURSOR/VALUE] knob to move the cursor to “POWER OFF.”
3. Press the [CURSOR/VALUE] knob.
The parameter value will be highlighted.
4. Turn the [CURSOR/VALUE] knob to change the setting to “OFF.”
5. Press the [CURSOR/VALUE] knob to nalize the setting.
6. Press the [DISPLAY] button.
You will return to the previous screen.