EasyManua.ls Logo

Roland SC-8820 - Effects that Distort the Sound (Distortion Type); 03: Enhancer; 04: Humanizer; 05: Overdrive

Roland SC-8820
192 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
50
Effects
03: Enhancer [01H, 02H]
The Enhancer controls the overtone structure of the high
frequencies, adding sparkle and tightness to the sound.
fig.9-3
+Sens (Sensitivity) 0–127 [1 (40 03 03)]
Adjusts the sensitivity of the enhancer.
#Mix (Mix Level) 0–127 [2 (40 03 04)]
Adjusts the proportion by which the overtones generated
by the enhancer are combined with the direct sound.
Low Gain -12–+12 [17 (40 03 13)]
Adjusts the gain of the low frequency range.
Hi Gain (High Gain) -12–+12 [18 (40 03 14)]
Adjusts the gain of the high frequency range.
Level (Output Level) 0–127 [20 (40 03 16)]
Adjusts the output level.
04: Humanizer [01H, 03H]
This adds a vowel character to the sound, making it similar
to a human voice.
fig.9-4
Drive 0–127 [1 (40 03 03)]
Adjusts the depth of distortion.
Drive Sw (Drive Switch) Off/On [2 (40 03 04)]
Turns Drive on/off.
+Vowel a/i/u/e/o [3 (40 03 05)]
Selects the vowel.
Accel 0–15 [4 (40 03 06)]
Adjusts the time over which the sound will move to the
specified Vowel. Smaller values will require more time.
Low Gain -12–+12 [17 (40 03 13)]
Adjusts the low frequency gain.
Hi Gain (High Gain) -12–+12 [18 (40 03 14)]
Adjusts the high frequency gain.
Pan (Output Pan) L63–0–R63 [19 (40 03 15)]
Adjusts the stereo position of the output sound. L63 is far
left, 0 is center, and R63 is far right.
#Level (Output Level) 0–127 [20 (40 03 16)]
Adjusts the output volume.
Effects that distort the sound (distortion type)
05: Overdrive [01H, 10H]
This effect creates a soft distortion similar to that produced
by tube amplifiers.
fig.9-5
+Drive 0–127 [1 (40 03 03)]
Adjusts the degree of distortion.
Amp Type (Amp Simulator Type)
Small/BltIn/2-Stk/3-Stk [2 (40 03 04)]
Select the type of guitar amp.
Small: small amp
BltIn: single-unit type amp
2-Stk: large double stack amp
3-Stk: large triple stack amp
Amp Sw (Amp Switch) Off/On [3 (40 03 05)]
Turns the Amp Type on/off.
Low Gain -12–+12 [17 (40 03 13)]
Adjusts the gain of the low frequency range.
Hi Gain (High Gain) -12–+12 [18 (40 03 14)]
Adjusts the gain of the high frequency range.
#Pan (Output Pan) L63–0–R63 [19 (40 03 15)]
Adjusts the stereo location of the output sound. L63 is far
left, 0 is center, and R63 is far right.
Level (Output Level) 0–127 [20 (40 03 16)]
Adjusts the output level.
06: Distortion [01H, 11H]
This effect produces a more intense distortion than
Overdrive.
fig.9-6
+Drive 0–127 [1 (40 03 03)]
Adjusts the degree of distortion.
Amp Type (Amp Simulator Type)
Small/BltIn/2-Stk/3-Stk [2 (40 03 04)]
Selects the type of guitar amp.
Small: small amp
BltIn: single-unit type amp
2-Stk: large double stack amp
3-Stk: large triple stack amp
L
R
Enhancer
Enhancer
Mix
EQ
EQ
L
R
Humanizer
EQ
Pan
Amp
Simulator
EQ
Pan
L
R
Over
drive
Amp
Simulator
EQ
Pan
L
R
Distortion

Table of Contents

Related product manuals