Product Support
EVQM-V01-R6 Installation and Operation Manual Quantum Intelligent EV Charging Pedestal
December 2023 Page 2 of 52
Contents
Product Support 1
Safety 3
Safety Advice within this Manual 3
Product Overview 4
Product Features 4
About Load Balancing 5
About Load Management 5
About Demand Side Response 6
About PME (PEN) Protection 6
Security – Tamper Protection 6
Security – Tamper Protection 6
Product Specification 7
Unpacking 12
Standard Contents 12
Options and Accessories 12
Labelling 13
Installation 14
BEFORE Installation 14
If a Ground Mounting Base Will be Used: 15
If a Ground Mounting Base Will Not be Used: 15
Schematics 16
Install the Pedestal 21
Install Load Balancing 22
Overview 23
Connect the CT to the Property 23
Extend the CT Cable 23
Connect the CT Cable to the Chargepoint 24
Configure Load Balancing 25
Configuration 25
Overview 25
Required Items 26
Preparation 26
EV Connect Configuration 28
Product Overview 28
No Camera or QR Code Reader? 29
Configuration For Installers 31
Installer Registration 32
Installer Projects 33
Configuration for Owners 37
Monta Connections 39
Configuration 39
Commercial - Use a Charge Point with Monta 40
Domestic – Use a Charge Point with Monta 41
Remove a Charge Point from Monta 43
Monta Labels 44
Chargepoint Installation Completion 44
Operation 45
End a Charging Session 46
About Charging Cables and Sockets 47
Maintenance 48
Replace the LED Bulb 48
Chargepoint Maintenance 50
About Software Updates 51
Suggested Inspection and Testing 52
To Next Page
Loading...