Need help?Do you have a question about the ROLEC QUANTUM ROLEC0411B and is the answer not in the manual?
Provides warnings, cautions, and notes for safe operation and installation.
Details the key functionalities and capabilities of the Quantum EV charging pedestal.
Explains the chargepoint's capability to prevent property power supply overloads during charging.
Describes how power for charging is dynamically adjusted based on property demands.
Explains how the chargepoint communicates with electricity providers for power control.
Details the PME fault detection feature that removes the need for a dedicated earth rod.
Outlines the two-level anti-tamper protection for electrical components and data.
Illustrates the overall dimensions and external features of the EV charging pedestal.
Shows the dimensions and design for an optional base for mounting the pedestal.
Displays a diagram of the typical internal components and their locations within the pedestal.
Details the key electronic modules: EV Charge Controller and Smart Communications Module.
Lists models, connection types, outputs, input supply, and product codes.
Provides comprehensive technical details including connectivity, power, environment, and certifications.
Lists the items included in the standard chargepoint package.
Details available optional accessories for the EV charging pedestal.
Describes various labels on the equipment, including rating, ID, and instructions.
Covers essential checks like signal strength and equipment condition before installation.
Details site preparation, ground mounting base installation, and surface mounting methods.
Provides detailed wiring diagrams for single-phase and three-phase chargepoint models.
Step-by-step guide for physically mounting the chargepoint pedestal.
Instructions for installing the optional load balancing system and connecting CT clamps.
Details on connecting CT clamps to the property and the chargepoint for load balancing.
Lists required items and preparation steps for configuring the chargepoint.
Guides on using the EV Connect app for initial chargepoint setup and connection.
Provides steps for connecting via Bluetooth without a QR code reader.
Details installer registration, project setup, and chargepoint configuration.
Guides owners through configuring the chargepoint using the EV Connect app.
Covers connecting, using, and removing charge points with the Monta application.
Explains how Monta ID labels enable guest charging and access.
Describes the meaning of different LED status lights for chargepoint operation.
Details the procedures for initiating and terminating an EV charging session.
Provides guidelines for using, storing, and maintaining charging cables and sockets.
Step-by-step instructions for replacing the LED bulb in the lighting head.
Covers routine cleaning, inspection, and functional testing of the chargepoint.
Explains how software updates are offered, downloaded, and installed on the chargepoint.
Outlines a recommended schedule for external, internal, and electrical inspections and tests.
General| Brand | ROLEC |
|---|---|
| Model | QUANTUM ROLEC0411B |
| Category | Automobile Battery Charger |
| Language | English |
To Next Page