Configuration
EVQM-V01-R6 Installation and Operation Manual Quantum Intelligent EV Charging Pedestal
December 2023 Page 38 of 52
6. After a few seconds the connection
process will be complete, and the
Configuration screen will be
displayed.
7. Enter the appropriate details into
each of the fields of the form.
Fields that have already been
completed by the installer may not
be accessible.
Many fields have in information
button if you need assistance.
Amongst the fields to be
completed, you will need to know:
x the charging application (Back
Office) you have chosen to use
(see step 8).
x the SSID and password of the
Wi-Fi in the property (if required).
8. To use the MONTA application,
select Monta from the dropdown
list.
x If a different application will be
used, select the appropriate
name from the list.
The connection details of the chosen application will be automatically entered in
the EV Connect application.
NOTE: If an unlisted application is to be used, you must select OTHER, then refer to the
application providers documentation for the connection details.
To Next Page
Loading...
Need help?
General