Service and cleaning
100 / 127
Service work
Top up oil
► Open oil filler plug
► Add oil using a suitable funnel and wait until it has run down.
Oil quality and oil filling quantity, refer to chapter "Lubrication ta-
ble".
► Check that the oil level is between the lower and upper markings.
► If the oil level is too low, add oil.
► Pour in oil up to the upper marking.
► Close oil filler plug.
Oil has been changed.
► Avoid contamination of the V-belts and V-belt pulleys caused by oil or
grease.
► Clean fouled V-belts and V-belt pulleys.
Dirty V-belts or V-belt pulleys reduce the power or interrupt the power trans-
mission.
To Next Page
Loading...
