Service and cleaning
101 / 127
Service work
8.8.2 Propulsion engine
Replace engine oil and oil filter
Engine oil and oil filter must always be replaced at the same time.
Drain engine oil
View of portable pump from below
1 Engine oil drain valve
► Place the portable pump in a raised position and secure against slip-
ping.
Recommendation to drain the engine oil better: raise the portable
pump approx. 10 cm on the side of the exhaust and place a suit-
able auxiliary material underneath.
► Allow the portable pump to warm up dry for approx. 2 minutes.
► Pull out the oil dipstick to ventilate the engine oil pan.
► Unscrew sealing cap on engine oil drain valve.
► Screw a suitable oil drain hose onto the engine oil drain valve by ap-
prox. 2-3 turns.
► Place collection container under the engine oil drain valve of the port-
able pump.
► Unscrew the oil drain hose completely.
► Drain engine oil.
► Collect the used oil.
Engine oil has been drained.
► Close oil drain plug.
► Dispose old oil properly.
Observe the local disposal regulations.
To Next Page
Loading...
