Operation
71 / 127
Options
► Press the Competition mode function switch.
Competition mode is preselected.
The status LED flashes red.
► Actuate the Stop propulsion engine function switch to deactivate the
control unit.
Control unit is deactivated.
Display is deactivated.
Status LED illuminates red.
►Actuate Start propulsion engine function switch.
Competition mode is activated.
The following operating steps are carried out automatically and in the
quickest possible time.
• The propulsion engine is started.
• Priming pump is activated.
• If priming procedure is completed the speed is increased.
► Adjust the output pump pressure via the Governor function switch.
Refer to chapter "Adjust water pump pressure".
Or
► Adjust the output pump pressure via the automatic pump pressure
governor.
Refer to chapter "Pump pressure regulator".
7.8.4 Training mode/competition mode Variant 2
With the Training mode and competition modefunction several operat-
ing steps are carried out with one push of a button.
The propulsion engine of the portable pump must be started.
Training mode
►Actuate Start propulsion engine function switch to start the propulsion
engine.
Propulsion engine is started.
► Press the Training mode function switch.
Training mode is preselected.
The status LED flashes red.
►Actuate Start propulsion engine function switch.
The training mode is activated.
The following operating steps are carried out automatically.
• Priming pump is activated.
• If priming procedure is completed the speed is increased.
► Adjust the output pump pressure via the Governor function switch.
Refer to chapter "Adjust water pump pressure".
Or
To Next Page
Loading...
