Operation
45 / 127
Preparation for initial commissioning
7Operation
7.1 Preparation for initial commissioning
The sequence of the described processes is to be maintained without ex-
ception!
Before initial start-up, check all operating fluids for correct filling level.
► Check oil in the priming pump.
For further information refer to Chapter "Testing and inspection
work".
► Check coolant in the expansion tank of the propulsion engine.
For further information refer to Chapter "Testing and inspection
work".
► Check engine oil in the propulsion engine.
For further information refer to Chapter "Testing and inspection
work".
► Check fuel in fuel tank.
The portable pump is delivered in empty state.
► Add fuel before initial start-up.
For further information refer to Chapter "Refuel".
To Next Page
Loading...
