Product description
28 / 127
Pump unit
Mechanical overheat protection
CAUTION!
Danger of burns due to touching the hot pump system and hot water
discharge!
Operating the pump with closed discharge outlets causes the temperature
of the pump to rise quickly.
Do not operate pump under full load with discharge outlets closed.
Do not touch any parts of the hot pump system.
Do not linger in the pump system danger zone.
Mechanical overheat protection
The mechanical overheat protection consists of a thermal element. The
thermal element opens at an extinguishing water temperature of approx. 60
°C and closes again at around 55 °C. Thus excluding overheating of the
pump. When the valve is open the warm water flows through a hose into
the open.
To Next Page
Loading...
