Changing the Modes of Operation
AC-A4x Installation and Programming Manual 17
6. Changing the Modes of
Operation
6.1 Changing from Normal to Secure Mode
The default factory setting for the Normal/Secure code is 3838.
To change from Normal to Secure mode:
1. Enter the 4-digit Normal/Secure code.
The Mode LED flashes red.
2. Press # to confirm the mode change.
The Mode LED turns red.
The Auxiliary Input can also be used to switch the Mode of Operation
from Normal to Secure and vice versa (see Section 11.8).
6.2 Changing from Secure to Normal Mode
The default factory setting for the Normal/Secure code is 3838.
To change from Secure to Normal mode:
1. Enter the 4-digit Normal/Secure code.
The Mode LED flashes green.
2. Press # to confirm the mode change.
The Mode LED turns green.
The Auxiliary Input can also be used to switch the Mode of Operation
from Secure to Normal and vice versa (see Section 11.8).
To Next Page
Loading...
