Programming the AC-A4x
AC-A4x Installation and Programming Manual 27
The Programming code cannot be erased; code 0000 is invalid
and does not erase the Programming code.
11.6 Changing the Normal/Secure Code
To change the Normal/Secure code:
1. Enter Programming mode.
2. Press 4 to enter Menu 4.
The Mode LED flashes red.
3. Enter the new 4-digit code that you want
to set as the Normal/Secure code.
The system returns to Normal mode:
Three beeps are emitted.
The Door LED turns off.
The Mode LED turns green.
When the Auxiliary Mode is 1, 2, 3, or 4, the Auxiliary
Input takes priority over the Normal/Secure code.
11.7 Changing the Normal/Bypass Code and
Door Chime Settings
The Normal/Bypass code is also used to turn the door chime off and
on.
To change the Normal/Bypass code and Door Chime Settings:
1. Enter Programming mode.
2. Press 5 to enter Menu 5.
The Mode LED flashes orange.
To Next Page
Loading...
Need help?
General
