Programming the AC-A4x
34 AC-A4x Installation and Programming Manual
b. Present a Proximity card (AC-A42) or enter the 4-digit PIN
that you want to assign as the Primary or Secondary code for
this slot number.
If the Proximity card or PIN entered is valid, the Mode LED
stops flashing and the controller is ready for you to enter the
next 3-digit slot number (refer to Step a) that you want to
assign a code to.
4. Do one of the following:
a. Press # to move to the next slot number.
b. If you do not wish to continue enrolling codes, press # twice
and the controller returns to Normal mode.
11.10.5 Enrolling Secondary Codes Using the Code
Search Method
The Code Search feature enables you to quickly enroll a Secondary
code to a user who already has a Primary code.
To enroll secondary codes using the Code Search method:
1. Enter Programming mode.
The controller is now waiting for the Primary code of the User to
whom you want to add a Secondary code.
4. Present the Proximity card (AC-A42) or enter the 4-digit PIN code
of the Primary code belonging to the user for whom you want to
add a Secondary code.
To Next Page
Loading...
Need help?
General
