Programming the AC-A4x
AC-A4x Installation and Programming Manual 25
11.3 Changing the Open Code
The Open code is mainly used as a method to quickly test the Lock
Strike Relay during installation.
The default factory setting for Open code is 2580.
When the first user is added to the controller, the default Open code
is automatically deleted, and is ready for a new Open code to be re-
entered.
To change the Open code:
1. Enter Programming mode.
2. Press 1 to enter Menu 1.
The Mode LED turns red.
3. Enter the new 4-digit code that you want
to set as the Open code.
The system returns to Normal mode:
The Door LED turns off.
The Mode LED turns green.
The Open code does not function in Secure mode.
Wrong entries return the controller to Normal mode.
Code 0000 erases and deactivates the Open code.
11.4 Changing the Auxiliary Code
The Auxiliary code is mainly used as a method to quickly test the Lock
Strike Relay during installation.
The default factory setting for the Auxiliary code is 0852.
When the first user is added to the controller, the default Auxiliary
code is automatically deleted, and is ready for a new Auxiliary code to
be re-entered.
To Next Page
Loading...
Need help?
General
