Programming the AC-A4x
36 AC-A4x Installation and Programming Manual
The Mode LED flashes red indicating the
controller is waiting for the Programming
code to confirm the deletion.
If the user slot is empty, a long beep is
emitted and the unit returns to Normal
mode.
4. Enter your programming code to confirm
the deletion.
If the Programming code is valid, three beeps are emitted and the
unit returns to Normal mode.
If the Programming code is invalid, a long beep is emitted and the
unit returns to Normal mode.
It is recommended that a record be kept of added and deleted
users so that it is easier to keep track of which user slots are
empty and which user slots are not.
11.11.2 Deleting Primary and Secondary Codes Using
the Code Search Method
To delete the Primary and Secondary codes using the Code
Search Method:
1. Enter Programming mode.
2. Press 8 to enter Menu 8.
The Mode LED turns red and the Door LED
turns orange.
3. Enter 000 as the 3-digit user slot number.
The Door LED flashes orange, indicating
that the controller is now waiting for the
Primary code of the user you want to
delete.
To Next Page
Loading...
Need help?
General
