Programming the AC-A4x
AC-A4x Installation and Programming Manual 31
11.9 Setting Fail Safe/Secure Operation, Tamper
Siren Time, and Lock Strike Release Time
1. Enter Programming mode.
2. Construct the 4-digit code using the
following instructions:
First Digit
For Fail Secure Operation, the first digit should be 0.
For Fail Safe Operation the first digit should be 1.
Second Digit
Tamper Siren time in minutes (1–9)
Third and Fourth Digits
Enter the number of seconds (from 1 to 99) that you want
the Lock Strike to be released.
For example, 0512 means a Fail Secure Operation consisting
of a 5-minute siren and a 12-second Lock Strike release time.
The system returns to Normal mode.
You hear three beeps.
The Door LED turns off and the Mode LED
turns green.
To Next Page
Loading...
