Table of Contents
iv AYC-E/Q60 Series Installation and Programming Manual
5. Controller Operation ................................................. 34
5.1 Normal, Secure, and Master Users .......................................... 34
5.2 Modes of Operation .............................................................. 35
5.2.1 Normal Mode ............................................................................... 35
5.2.2 Bypass Mode ................................................................................ 35
5.2.3 Secure Mode ................................................................................ 36
5.2.4 Changing the Modes of Operation ............................................... 36
5.3 Auxiliary Input and Output..................................................... 37
5.4 Door Alarms ......................................................................... 38
5.5 Internal Case and Back Tamper .............................................. 38
5.6 Lockout Feature (Keypad/Card Tamper) .................................. 38
5.7 REX Function ........................................................................ 38
5.8 Secured Intelligent Power Supply ........................................... 39
5.9 Programming as a Controller ................................................. 40
5.9.1 Entering Programming Mode ........................................................ 41
5.9.2 Exiting Programming Mode .......................................................... 41
5.9.3 Changing Lock Strike Code .......................................................... 42
5.9.4 Changing Auxiliary Code .............................................................. 42
5.9.5 Changing the Programming Code ................................................ 43
5.9.6 Changing the Normal/Secure Code .............................................. 44
5.9.7 Changing the Normal/Bypass Code and Door Chime Settings ...... 44
5.9.8 Setting Fail Safe/Secure Operation, Tamper Siren and Lock Strike
Release Time ................................................................................. 45
5.9.9 Defining the Auxiliary Input and Output ....................................... 46
5.9.10 Setting the Lockout Feature .......................................................... 52
5.9.11 Setting the Backlight Behavior ...................................................... 53
5.9.12 Selecting the Credential Format .................................................... 53
5.9.13 Enrolling Primary and Secondary Codes ........................................ 54
To Next Page
Loading...
