Rosslare AYC-E60B

To Next Page

To Previous Page

Table of Contents

AYC-E/Q60 Series Installation and Programming Manual v

5.9.14 Deleting Primary and Secondary Codes ......................................... 57

5.9.15 Relay Codes Assignment ............................................................... 60

5.9.16 PIN Code Length/Factory Default Settings ..................................... 62

5.9.17 Replacing a Lost Programming Code ............................................ 63

5.9.18 Replacing a Lost Normal/Secure Code ........................................... 63

A. Declaration of Conformity........................................ 64

B. Limited Warranty ...................................................... 65

Main Page

Table of Contents3
Introduction9
Box Content9
Ancillary Equipment10
Technical Specifications11
Installation13
Mounting the AYC-E6013
Figure 1: Drilling and Mounting Template for AYC-E6013
Mounting the AYC-Q6014
Figure 2: Drilling and Mounting Template for AYC-Q6015
Wiring16
Wiring the Unit as a Reader16
Table 1: Wiring the Reader to the Controller16
Wiring the Unit as a Controller17
Table 2: Wiring the Unit as a Controller17
Figure 3: Controller Application Wiring Diagram18
Figure 4: Controller Wiring - Using the Internal Power19
Figure 5: Controller Wiring - Using the External Power19
Reader Operation20
Standby Mode20
Programming as a Reader20
Table 3: Reader Programming Menu21
Entering Programming Mode22
Exiting Programming Mode22
Selecting Keypad Transmission Format23
Selecting HID Prox Card Transmission Format28
Selecting Rosslare Proximity Card Transmission Format29
Changing the Programming Code31
Changing the Facility Code31
Setting the Backlight Behavior32
Setting the Credential Format32
Return to Factory Default Settings33
Replacing a Lost Programming Code33
Controller Operation34
Normal, Secure, and Master Users34
Modes of Operation35
Normal Mode35
Bypass Mode35
Secure Mode36
Changing the Modes of Operation36
Auxiliary Input and Output37
Door Alarms38
Internal Case and Back Tamper38
Lockout Feature (Keypad/Card Tamper)38
REX Function38
Secured Intelligent Power Supply39
Programming as a Controller40
Table 4: Controller Programming Menu40
Entering Programming Mode41
Exiting Programming Mode41
Changing Lock Strike Code42
Changing Auxiliary Code42
Changing the Programming Code43
Changing the Normal/Secure Code44
Changing the Normal/Bypass Code and Door Chime Settings44
Setting Fail Safe/Secure Operation, Tamper Siren and Lock Strike Release Time45
Defining the Auxiliary Input and Output46
Table 5: Quick Reference Guide for Auxiliary Mode Setting47
Setting the Lockout Feature52
Setting the Backlight Behavior53
Selecting the Credential Format53
Enrolling Primary and Secondary Codes54
Deleting Primary and Secondary Codes57
Relay Codes Assignment60
PIN Code Length/Factory Default Settings62
Replacing a Lost Programming Code63
Replacing a Lost Normal/Secure Code63
Declaration of Conformity64
Limited Warranty65

Rosslare AYC-E60B - Page 5

Table of Contents

Related product manuals