Reader Functionality
34 AYC-E/Q/T60 Family Installation and Programming Manual
3. Enter one of the following codes:
10 – Always off
11 – Always on
12 – Backlight is off, activates for 10 seconds when a key is
pressed
(Mode LED also goes on), after which it dims until off
(Mode LED also goes off)
13 – Backlight is dimmed, activates for 10 seconds when a
key is pressed
(Mode LED also goes on), after which it returns
to a dimmed level
You hear three beeps.
The system returns to Transmit
mode.
5.2.10 Setting the Reader Format
To set the reader format:
1. Enter Programming mode.
2. Press 6 to enter Menu 6.
The Transmit LED turns red.
3. Enter the appropriate option number for the reader format:
61 for Rosslare proximity
62 for HID Prox
63 for Rosslare proximity and HID Prox (default)
You hear three beeps.
The system returns to Transmit
mode.
To Next Page
Loading...
