Rosslare AYC-Q60 User Manual

Introduction
AYC-E/Q/T60 Family Installation and Programming Manual 9
1. Introduction
The AYC-E/Q/T60 is a family of Rosslare go PROX & PIN readers with
Genuine HID Technology
™
, as well as Rosslare's Convertible
technology. The AYC-E/Q/T60 series automatically determines
whether to function as a reader or as a secured standalone controller.
If the unit is connected to a standard access control unit, then it
functions as a reader. If the unit is connected to a Rosslare secured
intelligent power supply such as the PS-A25T, PS-C25T, or PS-C25TU,
it functions as a 500 user secured standalone controller.
As a reader, the units can read all HID Prox cards/tags (125 kHz FSK)
using Genuine HID Technology and outputs HID Prox card data in
Wiegand according to the number of bits of data stored on the card.
The units also read Rosslare proximity cards (125 kHz) and can output
Rosslare proximity card data as Wiegand 26-Bit, Clock & Data, and
Wiegand + PIN.
As a controller, the units accept up to 500 users, and allow entry via a
personal identification number (PIN) and/or by presenting a proximity
card. The PIN code length for the controller has several options. The
PIN code length can be a set number of 4, 5, or 6 digits or it can be
flexible from 4 to 8 digits.
1.1 Key Features
The key features for the AYC-E/Q/T60 series are:
 Built-in proximity card reader (125 kHz Rosslare proximity/HID
Prox Modulation)
 Programmable blue backlit keypad
 UL-294 Attack Class III
 Optical back tamper sensor and open collector tamper output
 Lockout feature on wrong entry (keypad/card tamper)
 Internal buzzer provides audible interface feedback
 Two status/programming interface LEDs (tri-colored)
 Fully-potted construction for outdoor use

Rosslare AYC-Q60 Specifications

General

Brand	Rosslare
Model	AYC-Q60
Category	Card Reader
Language	English