Rosslare AYC-Q60 - Deleting User Codes; Deleting Primary and Secondary Codes; Standard Method: Deleting Codes

Controller Functionality
AYC-E/Q/T60 Family Installation and Programming Manual 61
5. Perform one of the following:
 Enter the PIN code to be
used as the Secondary code.
 Present the user card to be used as the Secondary code.
If the Secondary code is valid, the controller beeps three times
and returns to Normal mode.
If the Secondary code is invalid, the controller sounds a long
beep, and the AYC-E/Q/T60 continues to wait for a valid
Secondary code to be entered.
6.10.15 60BDeleting Primary and Secondary Codes
There are two methods to delete Primary and Secondary codes: the
Standard Method and the Code Search Method.
When deleting a user slot, both the Primary code and the Secondary
code are erased.
6.10.15.1 87BDeleting Primary and Secondary Codes using the
Standard Method
To delete the Primary and Secondary codes using the Standard
Method:
1. Enter Programming mode.
2. Press 8 to enter Menu 8.
The Mode LED turns red and the
Door LED turns orange.
3. Enter the 3-digit User Slot code
you wish to delete.
Mode/Transmit
Door/Program
Green
Mode/Transmit
Door/Program
Red
Orange