Controller Functionality
62 AYC-E/Q/T60 Family Installation and Programming Manual
The Mode LED flashes red
indicating the controller is
waiting for the Programming
code to confirm the deletion.
If the user slot is empty, you hear a long beep and the AYC-
E/Q/T60 returns to Normal mode.
4. Enter your Programming code to
confirm the deletion.
If the Programming code is valid, three beeps are heard and the
controller returns to Normal mode.
If the Programming code is invalid, a long beep is heard and the
controller returns to Normal mode.
It is recommended that a record be kept of added and deleted
users so that it is easier to keep track of which user slots are
empty and which user slots are not.
6.10.15.2 Deleting Primary and Secondary Codes using the Code
Search Method
To delete the Primary and Secondary codes using the Code
Search Method:
1. Enter Programming mode.
2. Press 8 to enter Menu 8.
The Mode LED turns red and the
Door LED turns orange.
3. Enter 000 as the 3-digit user slot
number.
The Door LED flashes orange.
To Next Page
Loading...
Need help?
General
