Controller Functionality
AYC-E/Q/T60 Family Installation and Programming Manual 47
3.
There are four different ways to program the Normal/Bypass code
and door chime:
Disable both Bypass code
and the door chime. Enter
the code 0000.
Disable Bypass code and
enable the door chime.
Enter the code 0001.
Enable Bypass code and
disable the door chime.
Enter any code ending with
0.
Enable Bypass code and
enable the door chime.
Enter a code not ending
with 0.
You hear three beeps.
The system returns to Normal
mode.
6.10.8 Setting Fail Safe/Secure Operation, Tamper Siren
and Lock Strike Release Time
To set the Fail Safe/Secure Operation, Tamper Siren and Lock
Strike Release Time:
1. Enter Programming mode.
Press 6 to enter Menu 6.
The Mode LED flashes green.
To Next Page
Loading...
