Controller Functionality
AYC-E/Q/T60 Family Installation and Programming Manual 39
2. Press # to confirm the mode change.
The Mode LED turns green.
6.3.3 Changing from Normal Mode to Bypass Mode
See Section 6.10.7 to create/modify the Normal/Bypass code.
To change from Normal to Bypass mode:
1. Enter the 4-digit Normal/Bypass
code.
The Mode LED flashes orange.
2. Press # to confirm the mode change.
The Mode LED turns orange.
6.3.4 Changing from Bypass Mode to Normal Mode
See Section 6.10.7 to create/modify the Normal/Bypass code.
To change from Bypass to Normal mode:
1. Enter the 4-digit Normal/Bypass
code.
The Mode LED flashes green.
2. Press # to confirm the mode change.
The Mode LED turns green.
To Next Page
Loading...
