Controller Functionality
AYC-E/Q/T60 Family Installation and Programming Manual 45
The Mode LED turns orange.
3. Enter the new code you wish to
set as the Auxiliary code.
You hear three beeps.
The system returns to Normal
mode.
• Auxiliary code does not work in the Secure mode.
• Wrong entries return the controller to Normal mode.
• Code 0000 erases the Auxiliary code.
• The factory default 4-digit Auxiliary code is 0852.
6.10.5 Changing the Programming Code
To change the Programming code:
1. Enter Programming mode.
2. Press 3 to enter Menu 3.
The Mode LED turns green.
3. Enter the new code you wish to
set as Programming code.
You hear three beeps.
The system returns to Normal
mode.
To Next Page
Loading...
Need help?
General
