Rosslare AYC-Q60 User Manual

Controller Functionality
AYC-E/Q/T60 Family Installation and Programming Manual 43
You will find a complete description and instructions for each of the
above menu items on the following subsections.
6.10.1 Entering Programming Mode
To enter Programming mode:
1. Press # twice within 2 seconds.
The Mode LED turns off and the
Door LED turns red
2. Enter your Programming code.
The Door LED turns green and
the AYC-E/Q/T60 enters
Programming mode.
• The AYC-E/Q/T60 must be in Normal mode to enter Programming
mode.
• The factory four-digit Programming code is 1234.
• If a Programming code is not entered within five seconds, the AYC-
E/Q/T60 returns to Normal mode.
6.10.2 Exiting Programming Mode
To exit Programming mode:
1. Press # twice within 2 seconds.
You hear 3 beeps.
The Door LED turns off and the
Mode LED turns green.
Wrong entries may reset the controller back to Normal mode.
While in Programming mode, if no key is pressed for one minute,
the AYC-E/Q/T60
exits Programming mode and returns to Normal
mode.
Mode/Transmit
Door/Program
Red
Mode/Transmit
Door/Program
Green
Mode/Transmit
Door/Program
Green

Rosslare AYC-Q60 Specifications

General

Brand	Rosslare
Model	AYC-Q60
Category	Card Reader
Language	English