Subject to change. Roto NT IMO_347_EN_v0
.
July 2014
.
11
General information
Limitation of liability
All details and instructions in this document were compiled taking into
account
the relevant standards and regulations, the state of the art, and
also many years of knowledge and experience.
The hardware manufacturer accepts no liability for damages resulting from:
– Failure to comply with this document and all product-specific documents
and related applicable directives (refer to the chapters Security,
Stipulated use).
– Operation other than that stipulated use / misuse (refer to the chapters
Security, Stipulated use).
– Insufficient invitation to tender, failure to adhere to the installation
instructions
or application drawings.
– Increased soiling.
Claims by third parties against the hardware manufacturer on the ground
ofdamages resulting from misuse or failure to follow the instruction
obligation
on the part of the hardware dealer, the manufacturer of windows
and balcony doors, and of the building element dealer or the builder are
transferred accordingly.
The undertakings agreed in the delivery contract, the general conditions of
business and the delivery conditions of the hardware manufacturer, and
thelegal regulations applicable at the time of concluding a contract are
effective
.
The warranty covers only original Roto components.
The right to technical modifications for the improvement of performance
characteristics and for further development is reserved.
To Next Page
Loading...