Roto NT Power Hinge - General Hardware Characteristics

22
.
July 2014
.
IMO_347_EN_v0 Roto NT Subject to change.
Information on the product
General hardware characteristics
NT hinge side K
Turn-Only/Tilt&Turn hardware system for windows and balcony doors
PVC
Central locking system for one-hand-operation completely concealed in
thesash-rebate
General hardware characteristics:
– Profiled faceplate
– Effortless operation with low abrasion due to guided adjustable locking
cams
– Easy adjustment of the locking cams with standard tools.
E cam: gasket-compression adjustable eccentric cam and/or
P cam: gasket-compression adjustable eccentric security cam and/or
V cam: height and gasket-compression adjustable eccentric security cam
– Strong interlocking “Clip&Fit” connection without loss of cam travel
– Link-slider guided stay arm, as standard with
- Integrated anti-slam device
- Variable tilt restrictor (80–140mm)
- Turn restriction
- Mishandling device in tilted position (only T&T version)
– Stay bearing and pivot rest installation flush with the overlap
– High-quality RotoSilNano surface-finish (matt-silvery) for maximum
corrosion
resistance (DINEN13126/8Class4) using Nano particles
(freefrom ChromiumVI compounds)
– 10-year warranty on the operativeness of the hardware
– 3D adjustment in stay arm / corner hinge / pivot rest
– Frame clearance of 12 / 20: 2 / 20 / 2 mm (top / hinge side / bottom)
– Tested in accordance with EN13126–8: 2006-02 and EN1191: 2000-08
and certified according to QM328
– Handles and cover caps are available in different RAL colours