Roto NT Power Hinge - Locking Cam Adjustment Instructions

Subject to change. Roto NT IMO_347_EN_v0
.
July 2014
.
87
Adjustment
Locking cam
Locking cam adjustment instructions
V cam (4 mm clearance)
Cam type Adjustment range Gasket-compression
adjustment/mm
Height adjustment/mm Side view / top view Tools
90° 90°
±0.8mm ±0.2 mm
180° 180°
– ±0.4 mm
270° 270°
±0.8mm ±0.6 mm
360° 360°
– ±0.8mm
V cam, extended (10mm clearance)
Cam type Adjustment range Gasket-compression
adjustment/mm
Height adjustment/mm Side view / top view Tools
90° 90°
±0.8mm ±0.2 mm
180° 180°
– ±0.4 mm
270° 270°
±0.8mm ±0.6 mm
360° 360°
– ±0.8mm
0 = Original position
– 0.8 mm
max. adjustment
+ 0.8 mm
max. adjustment
0 = Original position
– 0.8 mm
max. adjustment
+ 0.8 mm
max. adjustment