Roto NT Power Hinge - Information on These Instructions

6
.
July 2014
.
IMO_347_EN_v0 Roto NT Subject to change.
This manual contains important information, instructions and application
diagrams (maximum sash sizes and sash weights) as well as installation
instructions regarding the further work of the hardware.
Also, this manual contains binding guidelines to ensure the duty to instruct
through to the end-user.
The information and instructions in this manual refer to the products of the
Roto NT hardware system.
Apart from these installation, maintenance and operation instructions, the
following documents apply:
 Directives of the Quality Assurance Association: Locks and Hardware
(Richtlinie der Gütegemeinschaft Schlösser und Beschläge e.V.)
 Directives VHBE of the Quality Assurance Association: Locks and Hardware
(Richtlinie VHBE der Gütegemeinschaft Schlösser und Beschläge e.V.)
This manual should be stored in such a manner that it can be quickly used,
if needed.
Additional markings
To highlight handling directives, results, lists, references and other elements,
the following signs are used in this manual:
Marking Explanation
Sash
Frame
Drill holes
1
Hardware components
1. Action steps

First level of the hierarchy in a list
–
Unordered list (second level of the hierarchy)
 p. 12
(Cross) reference in tables
Refer to page12 (Cross) reference in the text
General information
Information on these instructions