Roto NT Power Hinge - NT Power Hinge

24
.
July 2014
.
IMO_347_EN_v0 Roto NT Subject to change.
Information on the product
General hardware characteristics
NT Power Hinge
Turn-Only/Tilt&Turn hardware system for windows and balcony doors
Timber and timber/aluminium
Surface-mounted hinge side with concealed central locking system and
one-hand-operation.
General hardware characteristics:
– Profiled faceplate
– Effortless operation with low abrasion due to guided adjustable locking
cams
– Easy adjustment of the locking cams with standard tools
E cam: gasket-compression adjustable eccentric cam and/or
P cam: gasket-compression adjustable eccentric security cam and/or
V cam: height and gasket-compression adjustable eccentric security cam
– Strong interlocking “Clip&Fit” connection without loss of cam travel
– Link-slider guided stay arm, as standard with
- Integrated anti-slam device
- Variable tilt restrictor (80mm)
- Mishandling device in tilted position (only T&T version)
– No additional scissor stay required
– Lifting mishandling device with sash lifter (LMD)
– 10-year warranty on the operativeness of the hardware
– Lateral and gasket-compression adjustment in the sash stay
– Height adjustment in the corner hinge
– Lateral adjustment in the pivot rest
– Tested in accordance with EN13126–8: 2006-02 and EN1191: 2000-08
and certified according to QM328
– Hinge side is available in all RAL colours
– Additional turn-restrictor required for sash weights of ≥160kg