Subject to change. Roto NT IMO_347_EN_v0
.
July 2014
.
13
Security
Stipulated application for end-users
Turn-Only and Tilt&Turn hardware
For windows and balcony doors with Turn-Only and Tilt&Turn hardware,
window and balcony door sashes can be brought into a turn position or
into a limited tilting position by means of the scissor stay.
When a sash is closed and the hardware is locked, the resistance of a
gasket
usually needs to be overcome.
WARNING!
Danger of injury and material damage from incorrect closing
and opening the sash!
Incorrect closing and opening of sashes can result in serious
injuries
and significant material damage.
Therefore:
– Ensure that when closing the sash, it does not collide with the
frame or with another sash.
– Ensure that the sash is guided slowly by hand throughout the
entire range of movement as far as the fully closed position,
and that it is brought very slowly towards the frame.
– Ensure that the sash never slams closed or swings open in an
uncontrolled manner.
Any use beyond or other than the stipulated application and installation of
the products is deemed to be misuse and can result in dangerous circum
-
stances.
WARNING!
Danger from misuse!
Misuse of
windows
and
balcony doors
can result in dangerous
circum
stances.
In particular, avoid the following applications:
– insertion of obstacles in the opening area between the frame
and the window or balcony door sashes.
– the deliberate or negligent application of excessive loads on
windows and balcony doors.
– deliberate or uncontrolled slamming or pushing of windows
and balcony doors against the window reveal. This can destroy
the hardware, frame materials, or other individual components
of the windows or balcony doors.
Claims for damages of any type whatsoever resulting of operation other
than that stipulated are excluded.
To Next Page
Loading...